Duet Web Control is a browser-based UI for your Hydra Research 3D Printer that allows full control from any computer on the same network. Duet Web Control can be accessed by typing your printer’s IP address in the URL bar of your browser. This is a limited overview of the Duet Web Control interface; for a more detailed description visit Duet Web Control Manual.
Interface Overview
- G-code entry box: Allows you to quickly send G-code commands to your printer.
- Upload & Start: Upload sliced prints to your printer. It is recommended to start prints directly from the printer to make sure everything is properly set up for printing.
- Emergency Stop: This button acts as a software emergency stop. For all intents and purposes, it is like turning the printer OFF and then back ON again. Use this if you need to stop what the printer is doing urgently.
- Status: Displays the status of important values including Tool Head position/speed and sensor values.
- Tools: Displays nozzle and bed temperatures, they can also be adjusted from this box.
- Temperature: Plots nozzle and bed temperatures over the course of a print.
- Current Tab: Displays the selected tab from the sidebar (Items 8-10). The default is Status. The sidebar and everything in the top section of Duet Web Control will stay the same regardless of the selected tab.
- Machine Control: This category contains tabs that allow you to control your printer.
- Dashboard: Allows you to control the motors and fans as well as run macros.
- G-Code Console: This is the same as the Console tab on the Touch Interface.
- Height Map: Displays the data from the last bed probing sequence.
- Current Job: This category contains some simple controls including babystepping as well as the Status tab, which gives current information about your printer.
- File Management: This category contains tabs that give access to various important files on your printer.
- G-Code Jobs: Same as the Print Jobs menu on the Control Tab. Run, add, delete, or organize print jobs.
- Macros: Same as the Macros menu on the touch interface. Run, add, delete, or organize macros.
- Filaments: This tab is where filament specific configuration is stored. This is primarily modified by firmware updates from Hydra Research, but expert users my want to experiment with adding their own materials here.
- System: Access to the configuration and system files for your printer. It is not recommended to edit these files unless you understand what you are changing
- Settings: This category contains a settings interface for Duet Web Control as well as your pritner.
- General: Duet Web Control settings. You should not have to change most of these settings except for theme control and adding a wireless webcam. These settings carry over between different printers running on Duets.
- Machine-specific: Duet Web Control settings for your printer, including some basic machine settings such as temperatures and babystepping.
0 Comments